# 2020 Ford Explorer Rear Camera Not Working: Fix Blank Screen

> ClearTheCode — Experiencing a 2020 Ford Explorer rear camera not working, showing a blank or blue screen? Learn common causes and step-by-step fixes to restore your rearview display.

Source: https://clearthecode.com/articles/rear-camera-not-working-ford-explorer-2020
Author: ClearTheCode

# 2020 Ford Explorer Rear Camera Not Working: Fix Blank Screen

Is your 2020 Ford Explorer rear camera not working, leaving you with a blank screen or a frustrating blue display when you shift into reverse? This common issue can be a significant safety concern, making parking and maneuvering much more difficult, especially in tight spaces or crowded areas. Whether the camera fails to activate completely or shows a distorted image, understanding the underlying causes and diagnostic steps can help you restore this crucial safety feature and regain confidence behind the wheel of your 2020 Ford Explorer.

## At a glance: difficulty, repair cost, and diagnostic workflow

- **Difficulty Rating:** 6/10 — Moderate
- **Common Symptoms:** Completely Blank Screen: The infotainment display remains black or shows no image when shifting into reverse.; Solid Blue Screen: The display turns blue, indicating a signal loss from the camera.
- **Estimated Repair Cost:** $100–$900 (parts + typical shop labor)
- **OEM Tooling Required:** Standard OBD-II scanner and hand tools

**Diagnostic workflow:**
1. Confirm the symptom on your vehicle.
2. Scan for stored or pending codes with an OBD-II tool.
3. Inspect the most common causes in this guide (visual checks first).
4. Run verification tests before replacing parts.
5. Repair, clear codes, and verify on a test drive.

## At a Glance

The rearview camera system in your 2020 Ford Explorer is an intricate network involving the camera module, wiring harness, infotainment system (APIM), and potentially the Body Control Module (BCM). When the 2020 Ford Explorer rear camera is not working, the problem often stems from one of these components. Common culprits range from simple blown fuses and software glitches to more complex issues like faulty camera modules or damaged wiring. While some fixes are straightforward and can be performed by a DIY enthusiast, others may require specialized tools or professional intervention to accurately diagnose and repair.

## Symptoms of a 2020 Ford Explorer Rear Camera Not Working

Drivers of the 2020 Ford Explorer often report similar symptoms when their rearview camera system experiences a fault. The most immediate and noticeable issue is the absence of a live video feed when the vehicle is placed in reverse. This can manifest as:

*   **Completely Blank Screen:** The infotainment display remains black or shows no image when shifting into reverse.
*   **Solid Blue Screen:** The display turns blue, indicating a signal loss from the camera.
*   **

## Related pages
- All repair guides
- [Browse vehicles](/vehicles)
- [Browse OBD-II codes](/codes)
- [Ford vehicle hub](/vehicles/ford)
- [Explorer model hub](/vehicles/ford/explorer)

---

This guide is not a substitute for OEM service procedures; use a qualified technician for safety-critical repairs.

## Frequently asked questions

### How urgent is this problem?
If symptoms are worsening or safety systems are affected, diagnose soon; minor issues can often wait for a scheduled service visit.

### Can I drive with this issue?
Short trips may be acceptable for some faults, but stop driving if you notice overheating, loss of braking, steering problems, or strong fuel smells.

### Do I need a dealer scan tool?
A basic OBD-II scanner helps confirm codes; some steps still need visual checks and meter tests described above.

## Explore related guides on ClearTheCode

- [Browse OBD-II codes](/codes)
- All repair guides