# Top 5 Problems With the 2025 Kia EV6

> ClearTheCode — Explore potential chronic issues for the 2025 Kia EV6, including ICCU failures, 12V battery drain, and infotainment glitches, based on earlier model year patterns.

Source: https://clearthecode.com/articles/top-5-problems-kia-ev6-2025
Author: ClearTheCode

# Top 5 Problems With the 2025 Kia EV6

## Quick answer
As the 2025 Kia EV6 is a new model year, widespread chronic issues have not yet emerged. However, based on patterns from previous EV6 model years (2022-2024) and the shared E-GMP platform, potential concerns include Integrated Charging Control Unit (ICCU) failures, 12V battery drain, and various software glitches. Owners should monitor for these common EV issues and consult their dealer for any early signs of trouble.

## Problems at a glance
1. Integrated Charging Control Unit (ICCU) Failure
2. 12V Battery Drain Issues
3. Infotainment System Glitches and Software Bugs
4. HVAC System / Heat Pump Performance Issues
5. Power Liftgate Malfunctions

## Why these problems are common on the 2025 Kia Ev6
The 2025 Kia EV6 largely carries over its design and core components from previous model years (2022-2024), which are built on Hyundai-Kia's Electric Global Modular Platform (E-GMP). While specific 2025 issues are not yet established, many of the potential problems identified here are known to affect earlier EV6 models and other E-GMP vehicles. These often stem from complex electrical systems, advanced software integration, and the demands placed on high-voltage components like the ICCU. As a relatively new EV platform, some components may still be undergoing refinement, leading to early-life failures or software-related annoyances that might persist into newer model years.
Related guides: [All repair guides](/articles) [Browse vehicles](/vehicles) [Browse OBD-II codes](/codes)

## Problem 1: Integrated Charging Control Unit (ICCU) Failure
The ICCU is a critical component in the Kia EV6, responsible for managing both high-voltage battery charging and converting high voltage to 12V for auxiliary systems. Failure of this unit can lead to the inability to charge the main battery or a dead 12V battery, effectively stranding the vehicle. This issue has been noted in earlier EV6 models and other E-GMP platform vehicles.

### Symptoms drivers notice
- "Check Electric Vehicle System" warning light
- Inability to charge the high-voltage battery
- Repeated 12V battery discharge, even after replacement
- Vehicle failing to start or power on
- Reduced power or "limp mode" activation
- Diagnostic trouble codes related to charging or power management

### Typical repair cost and time
DIY parts: Not feasible for DIY. Shop labor: $1,500 - $3,000+ (often covered under warranty)

### How to diagnose and fix
1. Check 12V battery voltage; if low, attempt to jump-start.
2. Scan for diagnostic trouble codes (DTCs), specifically looking for codes related to charging system or ICCU.
3. Verify charging functionality at various charging stations (AC and DC fast charging).
4. Inspect ICCU and associated wiring for visible damage or corrosion.
5. Perform a parasitic draw test on the 12V system to rule out other causes.
6. If ICCU failure is suspected, professional diagnosis and replacement by a Kia dealership or certified EV technician is required, often covered under warranty.

## Problem 2: 12V Battery Drain Issues
Owners of EV6 models have reported issues with the 12V auxiliary battery draining prematurely, even when the high-voltage battery is charged. This can prevent the vehicle from starting, as the 12V battery powers critical control systems. While sometimes linked to ICCU issues, other parasitic draws can also be culprits.

### Symptoms drivers notice
- Vehicle fails to start or power on, despite a charged main battery
- Warning lights for low 12V battery
- Infotainment system or accessories not powering up
- Frequent need to jump-start the vehicle
- Unusual electrical behavior or intermittent system failures

### Typical repair cost and time
DIY parts: $150 - $300 (for a new 12V battery). Shop labor: $100 - $500 (for diagnosis and replacement, or parasitic draw testing).

### How to diagnose and fix
1. Test the 12V battery's health (voltage, CCA) and replace if faulty.
2. Check charging system output to the 12V battery (managed by ICCU).
3. Perform a parasitic draw test using a multimeter to identify excessive current draw when the car is off.
4. Inspect fuses and relays for signs of failure or corrosion.
5. Check for aftermarket accessories that may be drawing power.
6. If a parasitic draw is identified, systematically disconnect circuits to isolate the faulty component or module.

## Problem 3: Infotainment System Glitches and Software Bugs
Modern vehicles like the EV6 rely heavily on complex software for their infotainment and driver-assist systems. Owners of previous EV6 model years have occasionally reported various software-related glitches, including freezing screens, unresponsive controls, or connectivity issues. These are often resolved with software updates but can be frustrating.

### Symptoms drivers notice
- Infotainment screen freezing or becoming unresponsive
- Navigation system inaccuracies or failures
- Apple CarPlay/Android Auto connectivity drops or failures
- Bluetooth pairing issues
- Backup camera not displaying or displaying incorrectly
- Intermittent warning messages without apparent cause

### Typical repair cost and time
DIY parts: $0 (software updates). Shop labor: $0 - $200 (for dealership software reflash if not covered by warranty or a recall).

### How to diagnose and fix
1. Attempt a soft reset of the infotainment system (check owner's manual for procedure).
2. Ensure the vehicle's software is up to date via over-the-air (OTA) updates or dealership visit.
3. Check for loose connections behind the infotainment unit (if accessible).
4. Perform a factory reset of the infotainment system (note: this will erase personal settings).
5. Test different USB cables and devices for Apple CarPlay/Android Auto issues.
6. Document the specific issues with photos/videos and report to a Kia service center for diagnosis and potential software reflash or hardware replacement.

## Problem 4: HVAC System / Heat Pump Performance Issues
The EV6 utilizes a heat pump for efficient cabin heating, especially in colder climates. Some owners of earlier EV6 models have reported issues with the HVAC system, particularly reduced heating performance in very cold temperatures or unusual noises from the heat pump unit. This can impact cabin comfort and defrosting capabilities.

### Symptoms drivers notice
- Insufficient cabin heating, especially in cold weather
- Unusual buzzing, whistling, or grinding noises from the front of the vehicle when heating is active
- Defrosting taking longer than expected
- "Check EV System" or HVAC-related warning lights
- Reduced driving range due to inefficient heating

### Typical repair cost and time
DIY parts: Not feasible for DIY. Shop labor: $500 - $2,000+ (for diagnosis, refrigerant service, or component replacement; often covered under warranty).

### How to diagnose and fix
1. Verify HVAC settings are correct and not in ECO mode if maximum heat is desired.
2. Check cabin air filter for blockage and replace if dirty.
3. Listen for unusual noises from the heat pump area when the system is running.
4. Monitor cabin temperature and compare to set temperature.
5. Scan for HVAC-related diagnostic trouble codes (DTCs).
6. Professional diagnosis by a Kia technician is required to check refrigerant levels, heat pump compressor function, and associated sensors or valves.

## Problem 5: Power Liftgate Malfunctions
The power liftgate on the Kia EV6 offers convenience but has been a source of minor complaints for some owners of previous model years. Issues can range from the liftgate failing to open or close properly, to intermittent operation or getting stuck in a partially open position. These problems are often related to sensors, motors, or alignment.

### Symptoms drivers notice
- Liftgate fails to open or close completely
- Liftgate stops mid-operation
- Unusual grinding or clicking noises during liftgate operation
- Liftgate not responding to button presses (key fob, interior button, exterior button)
- Warning messages indicating "Liftgate Malfunction"
- Liftgate closing on its own unexpectedly

### Typical repair cost and time
DIY parts: $50 - $200 (for new struts or sensor). Shop labor: $150 - $600 (for diagnosis, adjustment, or motor/sensor replacement).

### How to diagnose and fix
1. Check for any obstructions in the liftgate's path or around the latch mechanism.
2. Inspect the liftgate struts for damage or weakness.
3. Attempt to reset the liftgate system (often by manually opening/closing or disconnecting the 12V battery for a short period).
4. Verify all liftgate buttons (key fob, interior, exterior) are functioning.
5. Check for loose wiring or connectors around the liftgate motor and latch.
6. If issues persist, professional diagnosis is needed to check the liftgate motor, control module, sensors, and alignment.

## Which problem to fix first
For a 2025 Kia EV6, addressing any potential Integrated Charging Control Unit (ICCU) or 12V battery drain issues should be the top priority. These problems can render the vehicle inoperable and pose significant safety concerns if power is lost unexpectedly. While software glitches or minor liftgate issues are inconvenient, they typically don't prevent the car from driving or charging, making them secondary concerns compared to critical power management failures.

## When to see a professional
While basic checks like inspecting the 12V battery or performing infotainment resets can be done by owners, any persistent warning lights, charging failures, or significant electrical issues should prompt an immediate visit to a certified Kia service center. High-voltage systems and complex EV diagnostics require specialized tools and training, making professional intervention essential to ensure safety and proper repair.

## Frequently asked questions

### ### Is the 2025 Kia EV6 reliable?
As a brand-new model year, long-term reliability data for the 2025 Kia EV6 is not yet available. However, it builds on the established E-GMP platform, and its reliability is expected to be similar to previous EV6 model years, which have generally received positive feedback with some known issues like ICCU failures.

### ### Does the 2025 EV6 have battery issues?
While the high-voltage battery itself is generally robust, some previous EV6 models have experienced issues with the 12V auxiliary battery draining prematurely, often linked to the Integrated Charging Control Unit (ICCU). Owners of the 2025 model should monitor for any signs of 12V battery weakness or charging problems.

### ### What is the E-GMP platform?
E-GMP stands for Electric Global Modular Platform, which is Hyundai-Kia's dedicated architecture for battery electric vehicles. It's designed for optimal performance, range, and charging capabilities, and underpins models like the Kia EV6, Hyundai Ioniq 5, and Genesis GV60. Common issues across E-GMP vehicles, such as ICCU problems, can sometimes carry over between models.

## Sources and further reading
Owner forums, NHTSA complaints, and OEM TSB summaries informed this guide.

This guide is not a substitute for OEM service procedures; use a qualified technician for safety-critical work.