# P0130 — O2 Sensor Circuit (Bank 1, Sensor 1)

> ClearTheCode diagnostic code reference (not OEM service data).

Source: https://clearthecode.com/codes/P0130

**System:** Powertrain · Fuel & Air Metering

**Severity:** minor

## Description

Upstream oxygen sensor on Bank 1 is reporting an invalid signal. Replace the sensor; check wiring and connector for damage from heat.

## Diagnostic snapshot

- **Difficulty:** 6/10 — Intermediate diagnostics
- **Est. repair cost:** $120 – $450

## Diagnostic workflow

1. Confirm P0130 with a live scan — note pending vs stored and freeze frame data.
2. Inspect wiring/connectors and related sensors before replacing modules.
3. Clear codes and road-test; re-scan after two drive cycles if the monitor must set.