# P0134 — O2 Sensor No Activity (Bank 1, Sensor 1)

> ClearTheCode diagnostic code reference (not OEM service data).

Source: https://clearthecode.com/codes/P0134

**System:** Powertrain · Fuel & Air Metering

**Severity:** minor

## Description

Upstream O2 sensor isn't switching. Either failed sensor, broken heater circuit, or wiring open.

## Diagnostic snapshot

- **Difficulty:** 4/10 — DIY with OBD-II scanner
- **Est. repair cost:** $40 – $250
- **Common symptoms:** Check engine light (MIL), Rough idle

## Diagnostic workflow

1. Confirm P0134 with a live scan — note pending vs stored and freeze frame data.
2. Verify reported symptoms: Check engine light (MIL), Rough idle.
3. Inspect wiring/connectors and related sensors before replacing modules.
4. Most likely fixes: Replace oxygen sensor(s).
5. Clear codes and road-test; re-scan after two drive cycles if the monitor must set.

## Likely fixes

1. **Replace oxygen sensor(s)** (easy)