2017 Nissan Murano CVT Noise When Accelerating: Diagnosis & Fixes
Experiencing a 2017 Nissan Murano CVT noise when accelerating? Learn common causes, diagnostic steps, and repair options to quiet that whine and restore smooth driving.
At a glance
- Difficulty
- 8/10 — Advanced
- Est. repair cost
- $350 – $2.8k (parts + typical shop labor)
- OEM tooling
- Standard OBD-II scanner and hand tools
- Common symptoms
- 2017 Nissan Murano CVT Noise When Accelerating
If you own a 2017 Nissan Murano and have started noticing a distinct whining, humming, or droning noise that intensifies with acceleration, you're likely experiencing a common issue with the Continuously Variable Transmission (CVT). This sound is often described as a high-pitched whine that changes in pitch and volume as your vehicle speeds up, particularly noticeable when you press the accelerator. Addressing a 2017 Nissan Murano CVT noise when accelerating early is crucial to prevent further damage and costly repairs. This guide will help you understand why your Murano's CVT might be making these noises, how to diagnose the problem, and what repair options are available to restore your driving comfort and vehicle reliability. For more information on your specific model, visit our Murano model hub.
What Drivers Notice: The Signature CVT Whine
The most common complaint from 2017 Nissan Murano owners regarding their CVT is a persistent whining or humming sound. This noise typically manifests under specific conditions:
- During Acceleration: The whine is most pronounced when you press the gas pedal, increasing in pitch and volume as the engine RPMs rise and the vehicle gains speed.
- Varying Speeds: While often linked to acceleration, some drivers report the noise being present at steady highway speeds, albeit less intense.
- Temperature Sensitivity: The noise might be more noticeable when the transmission is cold, or after extended driving, indicating potential fluid or component wear related to temperature.
- Changing Pitch: Unlike a conventional geared transmission, a CVT's whine can sound somewhat
At a glance: difficulty, repair cost, and diagnostic workflow
- Difficulty Rating: 8/10 — Advanced
- Common Symptoms: 2017 Nissan Murano CVT Noise When Accelerating
- Estimated Repair Cost: $350–$2,800 (parts + typical shop labor)
- OEM Tooling Required: Standard OBD-II scanner and hand tools
Diagnostic workflow:
- Confirm the symptom on your vehicle.
- Scan for stored or pending codes with an OBD-II tool.
- Inspect the most common causes in this guide (visual checks first).
- Run verification tests before replacing parts.
- Repair, clear codes, and verify on a test drive.
Related pages
- All repair guides
- Browse vehicles
- Browse OBD-II codes
- Nissan vehicle hub
- Murano model hub
This guide is not a substitute for OEM service procedures; use a qualified technician for safety-critical repairs.
Frequently asked questions
How urgent is this problem?
If symptoms are worsening or safety systems are affected, diagnose soon; minor issues can often wait for a scheduled service visit.
Can I drive with this issue?
Short trips may be acceptable for some faults, but stop driving if you notice overheating, loss of braking, steering problems, or strong fuel smells.
Do I need a dealer scan tool?
A basic OBD-II scanner helps confirm codes; some steps still need visual checks and meter tests described above.
Explore related guides on ClearTheCode
Cited catalog sources
- EPA FuelEconomy.gov — MPG data & guide (EPA · US-GOV)
- EPA Green Vehicle Guide (EPA · US-GOV)
- EPA — Enforcement and compliance assurance (EPA · US-GOV)
- EPA — Fuel economy topics index (EPA · US-GOV)
- EPA — Green vehicles (efficient, advanced, electric) (EPA · US-GOV)
- EPA — Office of Transportation and Air Quality (OTAQ) (EPA · US-GOV)
- EPA — Transportation air pollution & climate change (EPA · US-GOV)
- EPA — Transportation and climate change (EPA · US-GOV)