The largest online repair guide library for every car

About us
Contact support
FAQ
Sign up
Sign in

2022 Polestar 2 Front Suspension Creaking/Squeaking Noise

0

Sarah K. · rep 0 · May 22, 7:45 AM · 1 replies · solved · Question

Vehicle: 2022 Polestar 2 Long Range Dual Motor

Hey everyone,

I've got a 2022 Polestar 2 Long Range Dual Motor, and I've started noticing a really annoying creaking or squeaking sound coming from the front end, especially when I go over speed bumps or turn at low speeds. It's not constant, but it's definitely getting more frequent.

It sounds almost like old bed springs, and it's pretty embarrassing for a relatively new car. I've checked for anything obvious like loose items or debris, but can't pinpoint it. Has anyone else experienced this with their Polestar 2? Any ideas what it could be or what I should look for?

Thanks for any help!

✓ Accepted solution

ClearTheCode Admin

ClearTheCode Team · rep 0 · May 22, 7:45 AM

0

ClearTheCode admin answer:

A creaking or squeaking noise from the front suspension, particularly over bumps or during turns, is a common complaint and can stem from several sources. While your Polestar 2 is relatively new, certain components can wear prematurely or develop issues.

Here are the common causes and steps:

  1. Sway Bar Bushings: These are very common culprits. The rubber bushings that hold the sway bar in place can dry out, crack, or wear, leading to friction and noise. Lubricating them temporarily might help diagnose, but replacement is often the long-term fix.
  2. Control Arm Bushings: Similar to sway bar bushings, the rubber components in your control arms can wear down, causing metal-on-metal contact or excessive movement, resulting in creaks.
  3. Ball Joints: Worn ball joints, which connect the control arms to the steering knuckle, can also produce creaking or clunking sounds as they lose their lubrication or develop play.
  4. Strut Mounts/Bearings: The top mounts of your struts, which attach to the vehicle's chassis, contain rubber and sometimes a bearing. If these fail, they can cause noise, especially when turning the steering wheel or going over uneven surfaces.
  5. Brake Caliper Issues (Less Likely for Creaking over Bumps): While less common for creaking specifically over bumps, sometimes brake components can contribute to noise. Ensure calipers are not sticking and pads are seated correctly.

When to See a Shop: If a quick visual inspection doesn't reveal any obvious loose parts or severe damage, it's best to have a qualified technician inspect the vehicle. Suspension components are critical for safety and handling. A professional can properly lift the car, inspect for play in joints and bushings, and pinpoint the exact source of the noise. Ignoring suspension noises can lead to accelerated wear of other components or, in rare cases, a loss of control. There are typically no OBD-II codes associated with mechanical suspension noises.

Menu

Help & account